Download Print this page

Infinite L-COM PXCNTMR Series User Manual

Contact sensor

Advertisement

Quick Links

To ensure your safety, make sure to observe the following:
• Do not use in environments that are flammable or contain explosive or corrosive
gases, chemicals, steam or humidity.
• Do not use it in environments with water, oil or other liquids.
• Please do not dissemble, repair or rebuild this product.
• Do not use beyond the recommended voltage and current range.
• Please observe electrical polarity when making connections.
• Please connect the load correctly.
• Please avoid short-circuiting the load.
• Please do not operate the product if the housing is broken.
• When disposing the tester, please treat it as industrial waste.
• Depending on the operating conditions (ambient temperature, supply voltage,
others), the temperature of the sensor surface may increase. In operation and
cleaning, please note that there is a danger of burns.
• Do not use in direct sunlight.
• Do not install in a place that is easily accessible by anyone except the user.
• Do not install in an environment with excessive vibration that may cause direct
shock to the product.
• Housing the product's wire and power lines in the same piping may cause
disturbance, malfunction or even destruction of the product.
• The extension wire requires a wire with a cross-sectional area of 0.3 mm or more
and a length of 100 m or less. In case the Korean S-mark certification model is used
as a certification product, please ensure that it is set below 10 m.
• If force is applied to the wire, please refer to the following: below 40N, 0.1N-m torque
less, 20N or less and 3 kg below the bending.
• When the power is turned on, the product can be detected within 200 ms. Hence,
if the load and product are connected to different power supplies, the product's power
must be turned on first.
• When the power is turned off, an output pulse may be generated. Please cut off the
power supply of the load or load line to prevent the same.
• Please avoid using thinner, gasoline, acetone, kerosene or other solvents to clean
the product.

Advertisement

loading

Summary of Contents for Infinite L-COM PXCNTMR Series

  • Page 1 To ensure your safety, make sure to observe the following: • Do not use in environments that are flammable or contain explosive or corrosive gases, chemicals, steam or humidity. • Do not use it in environments with water, oil or other liquids. •...
  • Page 2 1. L-com will repair the product free of charge if there is a malfunction caused by L-com Company within the above-mentioned warranty period. But the following will not be covered by the warranty: • Damage caused due to failure in following operating instructions or user manual specifically, when the L-com company has fulfilled the technical requirements in the given environment.

This manual is also suitable for:

L-com pxcntmr-t6-b/ledL-com pxcntmr-t8a-b/ledL-com pxcntmr-t8b-tx