Yaesu VX-170 Operating Manual page 24

R O
EPEATER
9. If you need to modify the VFO-B (transmit) frequency (for Doppler Shift correction,
etc.), just press the [ VFO ( PRI )] key, then make the necessary change, then press
[ VFO ( PRI )] key once more to restore VFO-A to the "receive VFO" position.
10. When you have finished with Split operation, re-enter the Set mode, and change Set
Mode Item 50:
A split frequency pair set up via the VFO Split feature cannot be stored directly into memory.
You can, however, store odd frequency pairs using a different (slightly simpler) procedure.
See page 29.
22
PERATION
VFO S
VFO.SPL VSP.OFF
to "
M
."
VX-170 O M