Yaesu VX-170 Operating Manual page 78

S M
ET ENU
Set Mode Item 27 M/T-CL
Function: Selects the MONI key (just below the PTT switch) function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver version.
MONI: Pressing the MONI key causes the Noise/Tone Squelch to be over-ridden, allow-
ing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the MONI key activates a 1750-Hz burst tone, used for repeater access
in many countries (especially in Europe).
Set Mode Item 28 NAME
Function: Toggles the display indication between "frequency" and the channel's "Alpha/
Numeric Tag."
Available Values: FREQ/ALPHA
Default: FREQ
Set Mode Item 29 NM WRT
Function: Stores Alpha-Numeric "Tags" for the Memory channels.
See page 31 for details.
Set Mode Item 30 PSWD
Function: Enables/disables the Password feature.
Available Values: PWD.OFF/PWD. ON
Default: PWD.OFF
Set Mode Item 31 PSWD W
Function: Stores the password.
Available entries are 0-9, A, B, C, D, E (substitute for " "), and F (substitute for "#")
Set Mode Item 32 RESUME
Function: Selects the Scan Resume mode.
Available Values: BUSY/HOLD/TIME
Default: BUSY
BUSY: The scanner will hold until the signal disappears, then will resume when the car-
rier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME: The scanner will hold for the five seconds, then resume whether or not the other
station is still transmitting.
76
M
ODE
VX-170 O M