The VR-5000 is a communications receiver providing general coverage reception from
100 kHz to 2600 MHz on the CW, SSB (LSB and USB), AM, and FM (Wide and Narrow
bandwidths) modes (this coverage includes the AM and FM broadcast bands, HF Short-
wave Bands up to 16 MHz, VHF and UHF TV bands, the VHF AM aircraft band, and a
wide range of commercial and public safety frequencies!).
Installation of the VR-5000 for everyday operation is may be accomplished in minutes.
However, care should be taken in the installation process, so as to ensure maximum perfor-
mance and safety. The procedures described below will ensure that you get the most out of
your new VR-5000 receiver.
After carefully removing the VR-5000 from its packing carton, inspect it for any signs of
physical damage. Rotate the knobs and push the switches, checking each for normal free-
dom of action. If damage is suspected, write down your observations in detail, and notify
the shipping company (if the set was shipped to you) or your dealer (if you purchased the
set in-person) immediately. Save the packing carton for possible use later.
AC Adapter PA-28B (120 V)/C (230-240 V)/U (230 V)
DC Cable
Operating Manual
Voice Synthesizer Unit
Voice Synthesizer Unit
Digital Voice Memory Unit DVS-4
VR-5000 O
I
I
S
A
AC Adapter•g PA-28•h
A
DSP-1
FVS-1A
M
Introduction
O
DC Cable
1