Table of Contents
Advertisement
General Information
Touchscreen Operation and Function
This product has a touchscreen monitor. The operator can select or change settings by
touching the icons on the monitor.
The icons on the [READY] screen and their functions are as follows:
No.
(1)
Displays the cleaving procedure. Follow instructions shown.
Displays the current cleave mode. Touch this icon to go to the [Select Cleave
(2)
Mode] menu.
Displays the current cleave conditions . Touch this icon to go to the
(3)
[Fundamental Settings] menu.
Displays Fiber Holder size. Touch this icon to go to the [Fiber Holder
(4)
Management] menu. If the Fiber Holder Adapter is not installed, this icon will
lead to the [Fiber Holder Adapter Installation] page.
Displays the number of cleaves that have been done with the current blade.
(5)
Touch this icon to go to the [Blade Management] screen.
(6)
Touch this icon to pause the cleaving procedure.
(7)
Touch this icon to go to the [Cleave Menu].
Touch this icon to go to the [General Information] page.
(8)
The operator can find the built-in manual here.
Displays the optimal insert sizes for the selected cleave mode.
(9)
Make sure the installed insert sizes and the displayed sizes are the same.
(9)
(6)
(7)
(
(8)
(4)
(5)
Function
CT114_Rev2
(1)
(2)
(3)
10
Advertisement
Table of Contents
