Garmin G1000 Diamond DA62 Pilot's Manual page 441

When a descent leg is captured, Vertical Path Tracking becomes active and tracks the descent profile. An
altitude capture mode ('ALTS' or 'ALTV') is armed as appropriate.
GPS is
Selected
Navigation
Source
If the Altimeter' s barometric setting is adjusted while Vertical Path Tracking is active, the Flight Director
increases/decreases the descent rate by up to 500 fpm to re-establish the aircraft on the descent path (without
commanding a climb). Adjusting the altimeter barometric setting creates discontinuities in VNV vertical
deviation, moving the descent path. For large adjustments, it may take several minutes for the aircraft to re-
establish on the descent path. If the change is made while nearing a waypoint with a VNV Target Altitude,
the aircraft may not re-establish on the descent path in time to meet the vertical constraint.
190-01895-00 Rev. A
Vertical Path
Tracking Active
Command Bars Indicate Descent to
Terminal
Maintain Required Vertical Speed
Phase of
Flight
Figure 7-12 Vertical Path Tracking Mode
Garmin G1000 Pilot's Guide for the Diamond DA62
AUTOMATIC FLIGHT CONTROL SYSTEM
VNV Target Altitude
Capture Armed
Vertical Deviation
Indicator (VDI)
VNV Target
Altitude
Required
Vertical
Speed
Indication
(RVSI)
427