Electrical Junction Box Mount Using Mount Plate; Power The Cw9166D1-Mr - Cisco MERAKI CW9166D1-MR Manual

Hide thumbs Also See for MERAKI CW9166D1-MR:

Table of Contents

4.2.1.2 Electrical Junction Box Mount Using Mount Plate

The CW9166D1-MR can be mounted to a 4" square cable junction box, a 3.5 or 4" round cable junction

box, or various U.S. and European outlet boxes (mounting screws are not included).

Using appropriate mounting hardware for your specific type of junction box, attach the mount

If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the Mount

Plate.

If mounting to a wall or ceiling, the Ethernet cable will feed through the cable slot on bottom of the CW9166D1-

MR.

Table of Contents