Configuring The Ip Address - Xerox CSX 2000 Installation Manual

The Configuration Wizard (if configuration recovery fails or is unavailable)

Configuring the IP Address

To set the IP address:
1. Verify that the displayed IP Address is correct and click Next.
Otherwise, click the Change button and type the new IP address.
The CSX2000 Color Server is set to DHCP server configuration.
For more details on how to get the IP or DHCP (also subnet mask and
default gateway) information, refer to the Xerox Installation and Planning
Guide.
If prompted to restart your computer, click No, (since you will be
2.
prompted at the end of the Configuration Wizard to restart your
system.) then, click Next to continue.
143