Reinstalling The Operating System - Xerox CSX 2000 Installation Manual

106

Reinstalling the Operating System

Before reinstalling, ensure the following information is available:
•
CD S/W pack
• Computer name (for example, CSX1)
• TCP/IP information (for example, DHCP = yes)
•
OEM Windows NT product ID#
• Gateway, WINS address, and DNS information
• AppleTalk Zone
•
IPX information
For more details, refer to the Xerox Installation and Planning Guide.
To reinstall the operating system:
If you are already logged into your system and the CSX2000 Color Server
workspace is open, exit the workspace and proceed to step 2.
Power up your computer.
1.
2. Place the System Software "NT Fast Install" CD-ROM # 1 in the
CD-ROM drive.
3. Restart the computer after inserting the CD-ROM (from the Start
menu, select Shutdown>Restart the Computer).
Wait until the MS-DOS 6.22 Startup Menu appears.
4.
5. Use the arrows to select one of the following installation options
and press .
ENTER
• Creo Software Complete Overwrite Installation
•
Creo Software Preservation Installation (System Partition
Overwrite)
•
DOS Prompt
The system starts copying the files.
6. After a few minutes, the system prompts you to remove the CD-
ROM from the drive and reboot.
Press + +
CTRL ALT
Chapter 2 Reinstalling your CSX2000 Color Server
to reboot.
DEL