Cadac CM-MD64 Hardware Overview page 21

Console and daisy chaining one CM-MD64 and one CM-SR stage rack
System below using one CM-MD64 and CM-SR stage rack using coaxial cables only
Cadac CM-J
series
NOTE: With the system setup above MegaCOMMS PORT A on the first stage rack MUST be connected to the console.
System below using one CM-MD64 and CM-SR stage rack with the CM-SR using fibre optic cable
Cadac CM-J
series
NOTE: With the system setup above MegaCOMMS PORT A on the first stage rack MUST be connected to the console.
NOTE: Only RG6 video cable suitable for 3G HD-SDI (High-Definition Serial Digital Interface) should be
used for the Cadac MegaCOMMS connections. The cables should be terminated in BNC connectors of
the appropriate type, and total system cable run should not exceed 100m (surface-to-stage rack or
stage rack to stage rack as a snake). A suitable cable: Kramer bulk Type BC-1X.
Coaxial Cable Run ≤100m
Cable Run ≤ 2 km
CM-MD64_24-05-2023_Iss-1.docx
Page. 21 / 31
CM-SR series stage rack
Coaxial Cable Run
Linking CM-MD64 and
CM-SR ≤ 100m
CM-MD64
CM-MD64
Coaxial Cable Run
Linking CM-SR and
CM-MD64 ≤ 100m
CM-SR series stage rack