3 Using the EVK
This chapter provides instructions for using the EVK, such as booting and how to configure and use I/O periph-
erals (e.g. serial console, Ethernet).
3.1 Evaluation Board Overview
An overview of the available connectors and devices on the EVK is shown below.
Buzzer
Battery
I2S
FAN
CTRL I/O
SMBus
CAN
Misc I/O
GPIO
SPI+I2C+1-wire
JTAG
SD-Card
Slot
Fig. 3.1: The base board for to RK3399-Q7 module.
RK3399-Q7 User Manual
v1.6
© Cherry Embedded Solutions GmbH
Page 5