3.16 CAN Bus
The board provides a CAN connector on the bottom row.
Fig. 3.18: CAN header
3.17 CTRL I/O Connector
The board provides signals for watchdog trigger in- and output, SoM PMIC power-on input, reset and external
display power enable.
Fig. 3.19: CTRL I/O header
3.18 MISC Connector
The board provides signals for thermal overheat of external hardware and the processor, utility signals for SD
and GPIO0.
RK3399-Q7 User Manual
v1.6
© Cherry Embedded Solutions GmbH
Page 17