3.
Insert custom size paper into the tray:
■
Single-sided printing: Insert the side to be printed facedown with the top of the page
entering the printer first.
■
2-sided printing: Insert side one faceup with the bottom of the page entering the
printer first.
4.
Adjust the paper guides to fit the paper loaded in the tray.
5.
On the control panel, press the OK button if the correct paper size and type are displayed
as the current setup, or select
■
If your custom paper size is displayed in the list, select it, and then press the
OK button. Go to Step 8.
■
If your custom paper size is not displayed in the list, select
then press the OK button.
, and then press the OK button.
Change setup
Phaser® 8560/8860 Printer
3-59
Printing on Specialty Media
8860p-009
8860p-106
, and
New Custom Size