Width guides: Slide the width guides until the arrows on the guides point to the
■
appropriate paper size labeled on the bottom of the tray. When properly positioned,
the guides click into place.
Note:
When the paper guides are adjusted correctly, there may be a small space between
the paper and the guides.
4.
Insert the tray into the tray slot and push it completely into the printer.
5.
On the control panel:
a.
Select
Paper Tray Setup
b.
Select either
Tray 2 Paper Type
press the OK button.
c.
Select the appropriate paper type, and then press the OK button.
See also:
Printing on Specialty Media
, and then press the OK button.
,
Tray 3 Paper Type
on page 3-31
Phaser® 8560/8860 Printer
3-21
Loading Paper
8860p-108
8860p-005
, or
, and then
Tray 4 Paper Type