Table of Contents
Advertisement
Playing Back your Recordings
Playback using the EVF or
LCD Mon itor
min.
BRIGHT
Bright
I
Dark
PHONE
(earphone)
jack
Before you begin...
+ Connect the Camcorder to a power source.
* Insert a recorded cassette.
1 Press the LCD-OPEN button to unlock
the LCD monitor and swing it open.
2 Set the POWER switch to VCR.
¢ The LCD monitor turns on and off
according to the POWER switch
setting.
+ When the LCD monitor is fully open,
the Viewtinder automatically turns
OFF.
+ When the LCD monitor is in the closed
position, you can view your recording
through the EVF.
¢ When not in use, close the LCD
monitor so that it faces inward.
3 Start Tape Playback.
® Press the REWIND/SEARCH
button to rewind the tape.
® Press PLAY to start playback.
© Press STOP to stop playback.
+ Adjust the volume of the speaker or
earphone (if connected) using the
VOLUME control.
e Adjust the brightness of the LCD
monitor using the BRIGHT control.
Auto Play
When the POWER switch is set to VCR,
playback will automatically begin if the
record tab has been removed on the
cassette.
Biren you are finished viewing, close
the LCD monitor completely. (The EVF
will turn on.)
Note:
« Using the LCD monitor reduces battery
operating time.
* If you connect the earphone (M3 type, not
supplied) to PHONE (earphone) jack, the sound
from the speaker will be muted.
29
OY
Dd
Lf
O
O
po
M
=
©
=.
O
=
Advertisement
Table of Contents
