Table of Contents
Advertisement
Camera Recording
Easy Edit Stand-by
If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
1 Press RECORD/PAUSE while
recording.
Set the POWER
switch to OFF and
leave the cassette in the Camcorder.
3 When ready to resume recording, set
POWER
the POWER switch to CAMERA and
Switch
press RECORD/PAUSE.
Note:
RECORD/
* If itis going to be longer than 24 hours before
PAUSE
you resume recording, you will need to use the
manual Easy Edit feature described below.
For proper continuity when taping from the Stop mode, or after changing the Battery
Pack.
I Set the POWER
switch to VCR.
20
Press REWIND/SEARCH to go
back a few seconds on the tape.
® Press PLAY to review the picture
on the Viewfinder.
© Press STILL at the location you
wish to continue your recording.
S sii the POWER
switch to CAMERA.
4 PNE RECORD/PAUSE to continue
recording.
Advertisement
Table of Contents
