Table of Contents
Advertisement
Camera Recording
Stand-by Quick Release
Whenever the Camcorder is left in RECORD/PAUSE
mode for 5 minutes, it will
automatically switch to Stand-by mode to conserve energy. Activating the Stand-by
Quick Release feature allows you to release the Stand-by mode and resume recording
by simply pressing the RECORD/PAUSE button. If this feature is not activated, it is
necessary to turn the Camcorder OFF, and then back to CAMERA to start recording
again. The default setting from the factory is OFF mode.
Before you begin...
e Connect the Camcorder to a power source.
¢ Insert a cassette with record tab
(see page 12).
Í Set the POWER
switch to CAMERA.
2 Press the MENU button to display
the MENU mode. Press UP 4 or
DOWN Y repeatedly to select
STAND-BY RELEASE
u
a0)
=:
©
Q
Lo
(D
—
Q9)
=
e,
-)
-
PAGE
1/2
--- MENU --
PROGRAMMED REC
TITLE
; ; AUTOMANUAL
TALLY LAMP
¡O
; ON
CLOCK SET
SELECT: PUSH ¥/a KEY
: PUSH DISPLAY KEY
END
: PUSH MENU KEY
3 Press the DISPLAY button to set ON
or OFF.
ON:
You can resume recording from Stand-
by mode by pressing the RECORD/
PAUSE button.
OFF:
RECORD/
You must set the POWER switch to
PAUSE
OFF, and then to CAMERA to release
the Stand-by mode.
Abres the MENU button to set your
selection and exit the Menu mode.
29
Advertisement
Table of Contents
