Function And Setting; Maintenance - Gardena EasyPlus Operator's Manual

3. FUNCTION AND SETTING

v (Fig. E)
Once the duration and frequency have been set,
the values will be applied 5 seconds later. The
green LED will flash three times to confirm this.
The first watering operation commences. This will
be the watering start time from now on. If you
want watering to commence later than this, press
the +1h button repeatedly within the 5-second
time window until the desired start time has been
set. All settings are deleted once the setting dial
is turned again and new settings are made.
Important: The combination of irrigation (grey) and
outdoor cooling mist setting (blue) is not possible.
The LED flashes orange 3 times as a warning that
no watering will be started.
Tip: When using a GARDENA Outdoor Cooling
Mist Set (Art. 13135 / 13137), select a frequency
of 3, 5 or 10 minutes. The water in the line will
continue to drain out through the micro mist noz-
zles even if the Water Control has already shut
off the water supply. Depending on the length of
the supply line, this can take up to 1 minute.
6
GAR_01888-20.960.08_2023-11-28.indb 6 GAR_01888-20.960.08_2023-11-28.indb 6

4. MAINTENANCE

5. STORAGE
To put into storage:
v The product must be stored away from
children.
v To preserve the battery, it should be
removed (Fig. B).
v Store the controller and the valve unit in
a dry, enclosed and frost-free place.
v (Fig. D)
28.11.23 16:12 28.11.23 16:12