Table of Contents
Advertisement
EXISTING CONSTRUCTION
IN-CEILING SPEAKERS
Template
Cut the drywall.
Connect the speaker wires to
Note:Always allow at least
the speaker.
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
ta swivel into place.
The in-celing speakers feature
unique swivel mounts for
the tweeters that enable you
to aim the very directional
high frequencies toward the
listening position, at ear-level
Strips of '
height. Before installing the
adiiesie
speaker grille, gently press on
the outer edge of the tweeter
mount to adjust the position of
Screw down each of the four
Phillips head screws. The
the tweeter. The tweeler will
locking tabs will swivel into
not swivel more than 15
place and secure the unit to
degrees in any direction; do
the rear surface of the drywall.
not attemot to force it to move
Put in the strips of adhesive to
further.
secure the grille.
Just for PDIC60/PDIC80
After installing the speaker grille,
gentiv press on the mesh of the
tweeter to adjust the position of
the tweeter.
Place the frame assembly
in the wall.
Replace the metal grille.
Advertisement
Table of Contents
