Table of Contents
Advertisement
EXISTING CONSTRUCTION
IN-WALL SPEAKERS
Cut the drvwall.
Screw out the two
Place the frame assembly
Connect the speaker wires
Note :Always allow at least
screws to seperate
jn the wall.
to the speaker.
the locking tabs will not be able
locking tabs will swivel into
to swivel into place.
place and secure the unit to
the rear surface of the drvwall.
,
The in-wall speakers feature
Strips of
—'
adhesive
unique swivel mounts for the
tweetersthat enable you to aim
the very directional high frequencies
toward the listening position,
at ear-level height.
PDIW55/PDIW65
tweeter adjustment:
Before installing the speaker grille,
gently press on the outer edge of
the tweeter mount to adjust the
position of the tweeter. The
tweeter will not swivel more than
15 degrees in any direction; do not
attempt to force it to move
further.
Put in the strips of adhesive to
secure the grille.
Replace the metal grille.
PDIW52/PDIW62
_Swivel
|
tweeter
dB switch
for tweeter
After installing the speaker grille,
gently press on the mesh of the
tweeter to adjust the position of
the tweeter.
Advertisement
Table of Contents
