Table of Contents
Advertisement
ATION
жак-
TOOLS
NEEDED
е easilv
aler ora
——
|
Co
=
Measuring tape
Utility knife
Í
=т=
==,
Carpenters level
Awl
ESHOOTING
UND
FROM
ANY
OF THE SPEAKERS:
plifier is on and a source is playing.
nnections between receiver/amplifier and speakers. Make sure all wires are connected. Make
er wires are frayed, cut, punctured or touching each other.
п of your receiver/amplifier.
JND COMING
FROM ONE SPEAKER:
trol on your receiver/ampiifier.
nections between гесеімег/атріћег and speakers. Make sure all wires are connected. Make
er wires are frayed, cut, punctured or touching each other.
t NO) BASS OUTPUT:
ions to the left and right "Speaker Inputs" have the correct polarity (+ and —).
ered subwoofer to your system.
modes, make sure your receiver/ processor is correctly configured. When using a subwoofer,
er output of the receiver/ processor has been enabled. If no subwoofer is being used,
right front and rear speakers have been configured as "LARGE." See your receiver/processor's
ler information on correct speaker configuration in Dolby Digital, DTS and other surround sound
'З AT LOW VOLUMES BUT SHUTS OFF AS VOLUME
13 INCREASED:
Advertisement
Table of Contents
