Advertisement
CARE & MAINTENANCE
Product inspection
Be sure to inspect and do maintenance on the main parts
the beginning of each season and also at regular intervals. Note that sunlight, rain, snow and extreme
temperature reduce the strength of these parts over time. If the checks are not done, the product
could become dangerous. If you find any of the following issues, or anything else that you feel could
cause harm to any user, the product should be disassembled and use should be discontinued until
the issues have been resolved. Make sure to replace defective or missing parts. Retain this manual for
future reference.
Check the following before each use:
•
All joints, bolts and nuts for tightness. Tighten if necessary.
•
All spring loaded (pit pin) joints are still intact and cannot become dislodged during play.
•
All coverings and sharp edges and replace when required.
•
Make sure that the hook-and-loop fasteners are closed correctly during use of product.
Please be aware of:
•
Bent, broken, or missing frame parts.
•
Protrusions of any types (especially sharp ones) on the frame, spring or mat.
WINDY CONDITIONS: If you expect windy weather conditions, the product should be moved to a
sheltered area or disassembled.
WINTER AND SNOW: In certain countries during the winter period, the snow load and the very low
temperatures can damage the product. It is recommended to store the soft parts indoors.
STORAGE: It is recommended to store the parts indoors during the off-season for longer durability.
Soft parts such as padding should be stored in room temperature and kept away from moisture. They
must be thoroughly dried before storage to avoid mold.
CLEANING: The frame tubes and the padding can be cleaned by wiping them with mild detergent.
Make sure that you clean all detergent residue from the parts. Remaining dirt can be cleaned with a
garden hose and cold water. The product can dry naturally in the sun.
DISASSEMBLY: To disassemble the product, follow the assembly instructions in reverse order. Use
gloves to protect your hands.
ACON X BASKETBALL HOOP
(frame fasteners, backboard,
7
padding) at
Version 1.1
Advertisement
