Care And Maintenance - Acon X SHADE User Manual & Assembly Instructions

CARE & MAINTENANCE
General product inspection instructions
Inspect and maintain the main components before each use and replace defective or missing parts. If
the checks are not done, the product could become dangerous.
Check the following before each use:
• All joints (and any nuts and bolts) for tightness. Tighten if necessary.
• Inspect any spring loaded (pit pin) joints are still intact and cannot become dislodged during play.
• All sharp edges and their coverings. Replace when required.
• Ensure that any hook-and-loop or similar fasteners are closed correctly during use of the product.
• Check that the components are without defects.
The following conditions could represent potential hazards:
• Punctures, frays, tears, or holes in the materials.
• Deterioration in stitching or fabric of the components.
• Bent, broken, or missing components.
• Damaged, missing, misplaced, or insecurely attached parts.
• Sharp protrusions of any types on the parts.
ACON X SHADE 8 Version 1.0