Technical Specifications; A8 Coffee Bean Hopper; Power Cord; Aquaclean Water Filter - Philips LatteGo 4400 Series User Manual

Problem
The machine is making a
loud noise.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the preset
quantities are approximate.
Description
Size (w x h x d)
Weight
Power cord length
Water tank
Coffee bean hopper capacity
Coffee grounds container capacity
LatteGo (milk container) capacity
Adjustable spout height
Nominal voltage - Power rating - Power supply
Cause
The rubber ring on the AquaClean
water filter is not in place.
It is normal that your machine
makes some noise during use.
The AquaClean water filter was
not prepared properly and air is
now drawn into the machine.
The water tank is not fully
inserted and air is drawn into the
machine.
Solution
Place back the rubber ring on the

AquaClean water filter.

If the machine starts to make a different
kind of noise, clean the brew group and
lubricate it (see 'Lubricating the brew
group').
Remove the AquaClean water filter from
the water tank and properly prepare it for
use before you place it back. See chapter
'AquaClean water filter' for step-by-step
instructions.
Make sure the water tank is in the correct
position: remove it and insert it again
pushing it as far as possible.
Value
246 x 377 x 434 mm
7.5 - 8 kg
1200 mm
1.8 litres
275 g
12 pucks
250 ml
88-145 mm
See data label on inside of service door (Fig. A11)
English
21