Xerox Phaser 6130 User Manual page 103

Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the
values of the straightest lines.
When "0" is the value nearest the straightest line, you do not need to adjust the color
registration. When the value is not "0", follow the procedure outlined in "Entering Values".
Note: You can also use the densest colors of the grid to find the straightest lines. The colors
printed at the highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction
Chart to make adjustments.
1. Press the Menu button to display the
2. Press the Up Arrow or Down Arrow button until
the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until
press the Forward Arrow or OK button.
5. Press the Up Arrow or Down Arrow button until
the Forward Arrow or OK button.
6. Press the Up Arrow or Down Arrow button until you reach the value displayed on the
chart.
7. Press the Forward Arrow button once and move the cursor to the next value.
8. Repeat steps 6 and 7 to continue adjusting the color registration.
9.
Press the OK button twice. The Color Registration Correction Chart is printed with the
new values. When printing is finished, the print screen is displayed again.
10.
Color registration adjustment is complete when the straightest Y (yellow), M (magenta),
and C (cyan) lines are next to the "0" line.
If "0" is not next to the straightest lines, determine the values and adjust again.
Note:
After printing the Color Registration Correction Chart, do not turn off the printer until
the printer motor has stopped running.
screen.
Menu
Admin Menu
Maintenance Mode
Adjust ColorRegi
Enter Number
Phaser® 6130 Printer
6-7
Color Registration
is displayed, then press
is displayed, then
is displayed, then
is displayed, then press