Table of Contents
Advertisement
Clip the drain cap by needle-nose pliers and pull out.
2) Firmly insert drains cap.
Firmly insert the drain hose and drain cap; otherwise, water may leak.
3) Pull out the drain hose.
In case of right or left piping
• After scribing slits of the front panel with a knife or a marking-off pin, cut them with a pair of nippers or
an equivalent tool.
9-EN
Do not apply lubricating oil
(refrigerant machine oil) when
inserting the drain cap. Application
causes deterioration and drain
leakage from the plug.
Slit
Drain cap
Drain cap
No gap
CAUTION
1) Put the drain hose.
3) Install the front panel.
– 9 –
Installation Manual
wrench (4 mm)
Advertisement
Table of Contents
