3. Disassembly and Reassemble
3-2. Disassembly (460UX-2 / 460UXn-2)
Cautions: 1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Remove the signal cable and the power cord before beginning the disassembly.
Description
1. Unfasten the 14 screws and remove the
Cover-Rear.
Caution: Your careful attention is
required when separating the
Function ASSY part during
removal of the Rear Cover.
2. Unfasten the 4 screws, remove the two
hex-screws on the D-SUB and detach
the network board.
(for the 460UXn-2 model only)
3-6
Picture Description
Screws