Storing The Modified Settings (The Write Operation); Utility Function Settings - Boss SX-700 Owner's Manual

Storing the Modified Settings
(The Write Operation)
Patch settings you modify are temporary and will return to the
original settings when you select another Patch (or turn the
unit off). If you wish to keep the modified settings, use the
Write operation.
(Procedure)
EFFECT PARAMETER
t BYPASS
COMMON LEVEL MAME EXIT WRITE "OuTERP US uTMTy
Momo moo
1,3
1 When you finish making settings, press [WRITE].
The following display will appear.
PATCH WRITE TO
CEDIT] > Cue
2 Use the NUMBER knob to select the write-destination
Patch number.
* If you wish to store the new settings in the original Patch
number, this step is not necessary.
* Patch numbers P1 - P128 are the Preset area, and cannot be
used to store your new Patches. If you have modified the
settings of a Preset area Patch, you can store it ina User area
(U1 ~ U128) Patch number.
* To cancel the write operation and return to editing, press
[EXIT].
3 Press [WRITE].
The modified settings will be stored in the Patch number
you specified in step 2. When the Write operation is
completed, the Play mode screen will reappear.
Utility Function Settings
The following pages explain the SX-700's Utility functions,
which allow you to configure the unit for the setup you are
using.
* For more information about MIDI, check out "MIDI Utility
Function Settings" (p.49).
* For more information about initialization, see "Restoring the
Factory Settings (Initialization)" (p.55).
(Procedure)
EFFECT PARAMETER
total Mae bere nt
= ow a oe
1. Press (UTILITY).
The button's indicator will up, and you're ready to make
settings for the Utility function.
2 Use PARAMETER [4] [P>] to access the parameter that you
wish to edit.
* If you continue pressing a PARAMETER button, the param-
eters will be displayed in succession.
3 Use the VALUE knob to change the setting. The value will
change more rapidly if you press the VALUE knob as you
rotate it.
4 Repeat steps 2 and 3 to set the desired Utility parameters.
5 Press [EXIT] to return to the Play mode screen and end the
operation.
22