Test Signal - Panasonic NV-F65EA Operating Instructions Manual

The adjustments described on this page are not necessary,
if the VTR is connected to the TV set via the Video/Audio
output sockets.
Video Playback Channel Selector
This switch is used to select the Video Playback channel
which is not occupied with any TV station (2 or 3).
TEST SIGNAL
0 O
© Turn the TV set on and select the AV programme
position or another programme position that is not
occupied by any TV station.
© Press the VTR On/Off Switch to turn the VTR On.
(FRONTSIDE)
(
VTR
ca
-^
V_
•The corresponding indicator lights up.
Press the VTR/TV Selector to " VTR" position.
(FRONTSIDE)
VTR/TV
]
V
y
•VTR Indicator will appear in the Multi-Function Dis¬
play.
© Set the Test Signal Switch to "On".
off I
I I
ON
TEST SIGNAL
© Tune the selected programme position (channel) of the
TV set to VHF channel 2 or 3.
Confirm on your TV set that the received test pattern is
as shown,
© Set the Test Signal Switch to "Off". Your TV is now
ready to receive the RF output signal from the VTR.
Q
OFF I
ION
TEST SIGNAL
To check, play back a pre-recorded tape and confirm
picture quality.
© In some cases, further fine tuning is required in order to
get optimum colour and sound. Note that the test signal
is only a guide.
(
10
)