Advertisement
ç Contents
Still Images/Movies
●
If the camera makes no operating sounds, it may have been
turned on while holding down [
the [
choose [Off].
Still Images
●
A blinking [
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
●
If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see "Camera" ( = 520).
●
The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
range of focus (shooting range), see "Shooting Range" ( = 525).
●
To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
●
A blinking [ ] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has finished
recharging. Shooting can resume as soon as the flash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
●
No shutter sound is played when "Sleeping" and "Sleeping
Babies" icons ( = 76) are displayed.
●
Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
] button, choose [Mute] on the [ 3] tab, and then
] icon warns that images are more likely to be
]. To activate sounds, press
74
Advertisement
