Advertisement
ç Contents
●
Some shutter speeds may cause flickering on the screen when
recording under fluorescent or LED lighting, which may be
recorded.
●
With the ISO speed in [AUTO] mode, you can also adjust the
exposure before recording by turning the exposure compensation
dial.
●
When the ISO speed is fixed, an exposure level mark based on
your specified value is shown on the exposure level indicator for
comparison to the standard exposure level. The exposure level
mark is shown as [ ] or [ ] when the difference from standard
exposure exceeds 3 stops.
●
You can check the ISO speed in [AUTO] mode by pressing the
shutter button halfway. If standard exposure cannot be obtained
with your specified shutter speed and aperture value, the ISO
speed is displayed in orange.
●
Focus can be adjusted during recording by touching [
switch it to [
]) and then pressing the [
] (to
][
] buttons.
230
Advertisement
