Advertisement
ç Contents
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note
that this is not possible unless you have calibrated the electronic
level.
To adjust left/right tilt, choose
z
[Horizontal Roll Calibration],
and to adjust forward/backward
tilt, choose [Vertical Pitch
Calibration], followed by the [
button. A confirmation message is
displayed.
Choose [OK], and then press the
z
[
] button.
Choose [Electronic Level] on the
z
[ 1] tab, and then press the [
button.
Choose [Reset], and then press
z
the [
] button.
Choose [OK], and then press the
z
[
] button.
391
]
]
Advertisement
