Advertisement
ç Contents
Flash
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For
details on the flash range, see "Camera" ( = 520).
●
The setting screen cannot be accessed by pressing the [ ] button
when the flash is lowered. Move the [ ] switch to raise the flash,
then configure the setting.
●
If the flash fires, vignetting may occur.
●
You can also configure this setting by pressing the [ ] button,
touching the desired option, and then touching it again.
1
Raise the flash.
Move the [ ] switch.
z
2
Configure the setting.
Press the [ ] button, choose
z
a flash mode (either press
the [ ][ ] buttons or turn the
[ ] dial), and then press the [
button.
The option you configured is now
z
displayed.
Still Images
208
Movies
]
Advertisement
