Advertisement
ç Contents
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion,
because the camera continues to focus on the subject and adjust
the exposure as long as you press the shutter button halfway.
●
Focusing may not be possible in some shooting conditions.
●
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF method.
Continuous shooting ( = 90) is slower in Servo AF mode.
●
●
If optimum exposure cannot be obtained, the shutter speed and
aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
AF lock shooting ( = 207) is not available.
●
Not available when using the self-timer ( = 86).
●
1
Configure the setting.
Press the [
z
[ONE SHOT] in the menu, and
then choose [SERVO] ( = 58).
2
Focus.
The focus and exposure are
z
maintained where the blue AF
frame is displayed while you
are pressing the shutter button
halfway.
Still Images
] button, choose
200
Movies
Advertisement
