2. Layout and items supplied Danger! When using the equipment, a few safety pre- cautions must be observed to avoid injuries and 2.1 Layout (Fig. 1/7) damage. Please read the complete operating 1. Locking sleeve instructions and safety regulations with due care. 2.
3. Proper use Wear ear-muff s. The impact of noise can cause damage to hea- ring. The equipment is designed for drilling work with hammer action in concrete, rock and brick, al- Total vibration values (vector sum of three direc- ways using the correct drill bit.
Limit the operating time. 5.3 Inserting a tool (Fig. 4) All stages of the operating cycle must be conside- Important! Set the changeover switch (3) to its red (for example, times in which the electric tools center position whenever you carry out any work are switched off...
Page 15
When shipping or disposing of batteries and Danger! cordless tools, always ensure that they are To avoid danger, the machine must only be held packed individually in plastic bags to prevent using the two handles. short circuits and fi res. Otherwise you may suff...
10. Charger indicator Indicator status Explanations and actions Red LED Green LED Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Off Charging The charger is charging the battery pack in quick charge mode. The char- ging times are shown directly on the charger.
* Not necessarily included in the scope of delivery! Please register the product warranty of Einhell brand products. Customers must scan the QR Code of the Serial number in the product or QR code on the box, to additional 6 months warranty for the whole battery and battery charger (Note: Promotion is change without prior notice.