Xerox Nuvera 120 Customer Information page 3

3. In the Server field enter the name of the DocuTech /Nuvera 120 CP you will be scanning
back from.
4. In the queue name field enter the name of the queue on the DocuTech /Nuvera 120 CP.
The Nuvera 120 CP only has one queue created on it.
Note: The queue name will be the controller name followed by an upper case
VP.
5. In the printer model server type the user will select the Xerox DocuTech 120 C/P:
DocuSP Server 4.0 from the drop down menu.
6. In the user name and password field input the name of the user and password on the
DocuTech /Nuvera 120 C/P you will be scanning back from.
7. The server path field should contain the path of the directory you created earlier on the
DocuTech /Nuvera 120 C/P. In this example we used /var/spool/XRXnps/saved/digipath.
8. Do not chose the [Log Errors] check box because it will cause erroneous errors to be
generated back at the DigiPath.
9. In the save jobs to field select a Windows file system directory or a cabinet to save the
files back to on the DigiPath. This directory or cabinet will be where the files reside after
they are scanned back to DigiPath.
Viewing the save directory at the DigiPath
1. View the directory that was created in step 9 of the Creating a Network Agent Queue at
the DigiPath instructions in this document.
2. The job name that was given in step 2 of the Scanning a document back to DigiPath from
the DocuTech /Nuvera 120 C/P Printer instructions in this document should show up in
the directory or cabinet as an RDO file.
3. Double click on the RDO file to open the file in Document Scan and Makeready.
APPROACH 3 Using Network Agent to retrieve files from DocuTech /Nuvera 120 C/P
Potential usage: Depending on the specific job type the user may chose to obtain the
DocuTech /Nuvera 120 C/P image quality instead of using the DigiPath interpreter
to render image quality.
At the DocuTech /Nuvera 120 C/P printer
1. Open a terminal window
2. The user will create the save directory on the DocuTech /Nuvera 120 C/P printer. In this
example the directory path is /var/spool/XRXnps/saved/digipath.
Note: As mentioned earlier in the document the user can chose any location for the save
directory.
3. If a network agent user has been created on the DocuTech /Nuvera 120 C/P make sure the
user has access to the created directory.
At the DigiPath create a Network Agent Queue
1. Go to Printer Administration in the DigiPath Production Software menu and chose
Network Agent.