Safety Regulations; Proper Use; Layout And Items Supplied; Technical Data - EINHELL TE-CB 18/180 Li Operating Instructions Manual

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Blower tube
2. On/Off switch
3. Motor unit
4. Selector switch for 1st gear – 2nd gear
5. Attachable nozzles
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
Anl_TE_CB_18_180_Li_SPK7_THA.indb 13 Anl_TE_CB_18_180_Li_SPK7_THA.indb 13
EN
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless blower
•
Blower tube
•
Attachable nozzles
•
Original operating instructions
•
Safety information

3. Proper use

The cordless blower is designed for use in the
workshed for removing dust and particles of dirt
or making them into piles in areas which are hard
to reach.
It can also be used for pumping air into objects
such as air mattresses or similar using the at-
tachable nozzles (5) included in delivery.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply ................................18 V d.c.
Idling speed I n₀ .............................. 11,500 min
Idling speed II n₀ ..............................15,500 min
Air speed I .............................................. 130 kph
Air speed II ...............................................180 kph
Weight ........................................................1.0 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
- 13 -
-1
-1
01.08.2023 10:21:26 01.08.2023 10:21:26