Related Manuals for AEMC instruments SR661
Summary of Contents for AEMC instruments SR661
- Page 1 User Manual ENGLISH AC Current Oscilloscope Probe Model SR661 CURRENT MEASUREMENT PROBES WITH AEMC INSTRUMENTS ®...
- Page 2 Copyright Chauvin Arnoux , Inc. d.b.a. AEMC Instruments. All rights reserved. © ® ® No part of this documentation may be reproduced in any form or by any means (including electronic storage and retrieval or translation into any other language) without prior agreement and written consent from Chauvin Arnoux , Inc., as governed by United States and International copyright laws.
- Page 3 For recalibration, please use our calibration services. Refer to our repair and calibration section at www.aemc.com/calibration. Serial #: Catalog #: 2113.49 Model #: SR661 Please fill in the appropriate date as indicated: Date Received: Date Calibration Due: Chauvin Arnoux , Inc. ®...
-
Page 4: Table Of Contents
TABLE OF CONTENTS 1. INTRODUCTION ..............5 1.1 INTERNATIONAL ELECTRICAL SYMBOLS ......5 1.2 DEFINITION OF MEASUREMENT CATEGORIES ....5 1.3 PRECAUTIONS FOR USE ..........6 1.4 RECEIVING YOUR SHIPMENT ..........6 1.5 ORDERING INFORMATION ............. 6 1.5.1 Accessories and Replacement Parts ......... 6 2. -
Page 5: Introduction
Example: hardwired equipment in fixed installation and circuit breakers. CAT II: Corresponds to measurements performed on circuits directly connected to the electrical distribution system. Example: measurements on household appliances and portable tools. AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 6: Precautions For Use
1.5 ORDERING INFORMATION AC Current Oscilloscope Probe Model SR661 ......Cat. #2113.49 Includes a user manual. 1.5.1 Accessories and Replacement Parts Adapter - BNC (Female) to 4 mm Banana (Male) ......Cat. #2119.94 AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 7: Product Features
The probe connects directly to an oscilloscope through an insulated coaxial cable with an insulated BNC. 2.2 COMPATIBILITY The Model SR661 is compatible with any analog or digital oscilloscope or other voltage-measuring instrument which has the following features: ■ BNC input connector ■... -
Page 8: Features
4. Arrow indicates direction of current flow. Current flows in a positive direction when it travels from supply to load. 5. Three position switch 6. 6.5 ft (2 m) output cable AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 9: Specifications
100 mV/A, (1 V at 10 A Range Accuracy Phase Shift (0.1 to 0.5) A (0.5 to 2) A ≤3 % ± 10 mV (2 to 10) A ≤15° (10 to 12) A Overload: 12 A continuous AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 10: Mechanical Specifications
Dimensions: (4.4 x 8.5 x 1.8) in (111 x 216 x 45) mm Weight: (1.21 lbs) (550 g) Jaw Opening: (2.25 in) (57 mm) max Maximum Cable Diameter: (2.13 in) (54 mm) AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 11: Environmental Specifications
Dielectric Strength: 5550 V, 50/60 Hz between primary, secondary, and the outer case of the handle Electromagnetic Compatibility: This device is in conformity with standard IEC 61326-1. *Specifications are subject to change without notice. AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 12: Typical Response Curves
-5.00 1000 10,000 100,000 Frequency (Hz) Phase Shift vs. Frequency 5.00 0.00 -5.00 -10.00 -15.00 -20.00 -25.00 -30.00 @ 10 A -35.00 @ 50 A -40.00 1000 10,000 100,000 Frequency (Hz) AC Current Oscilloscope Probe Model SR661 - User Manual... - Page 13 @ 5 A -30.00 1000 10,000 100,000 Frequency (Hz) Phase Shift vs. Frequency 10.00 0.00 -10.00 -20.00 -30.00 -40.00 -50.00 @ 1 A -60.00 @ 5 A -70.00 1000 10,000 100,000 Frequency (Hz) AC Current Oscilloscope Probe Model SR661 - User Manual...
- Page 14 -45.00 1000 10,000 100,000 Frequency (Hz) Phase Shift vs. Frequency 40.00 30.00 20.00 10.00 0.00 -10.00 -20.00 -30.00 @ 0.1 A -40.00 @ 0.5 A -50.00 1000 10,000 100,000 Frequency (Hz) AC Current Oscilloscope Probe Model SR661 - User Manual...
-
Page 15: Operation
WARNING: Always connect the probe to the instrument before clamping onto the circuit under test. ■ Connect the Model SR661 to the proper input channel on the oscilloscope. ■ Begin with the least sensitive range on the current probe (1 mV/A) ■... -
Page 16: Maintenance
Lubricate the jaws mating surfaces with a light oil. ■ Do not use chemicals containing benzine, benzene, toluene, xylene, acetone, or similar solvents. ■ Do not immerse the probe in liquids or use abrasive cleaners. AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 17: Repair And Calibration
Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ® ® Phone: (800) 343-1391 (Ext. 351) Fax: (603) 742-2346 E-mail: techsupport@aemc.com www.aemc.com AC Current Oscilloscope Probe Model SR661 - User Manual... -
Page 18: Limited Warranty
(603) 749-6434 (Ext. 360) Fax: (603) 742-2346 E-mail: repair@aemc.com Caution: To protect yourself against in-transit loss, we recommend that you insure your returned material. NOTE: You must obtain a CSA# before returning any instrument AC Current Oscilloscope Probe Model SR661 - User Manual... - Page 19 NOTES:...
- Page 20 01/24 99-MAN 100130 v16 AEMC Instruments ® 15 Faraday Drive • Dover, NH 03820 USA Phone: +1 (603) 749-6434 • +1 (800) 343-1391 • Fax: +1 (603) 742-2346 www.aemc.com © 2009 Chauvin Arnoux , Inc. d.b.a. AEMC Instruments. All Rights Reserved. ®...
Need help?
Do you have a question about the SR661 and is the answer not in the manual?
Questions and answers