Customer Agreement; Devices; Primary Customer Applications; Special Considerations / Limitations - Xerox DocuTech 128 Planning Manual

C.P. Bourg Document Finisher (BDFx)

7. Customer Agreement

Devices

Primary Customer Applications

Special Considerations / Limitations

I have reviewed the solution expectations and understand the specifications and
limitations for each of the modules that will be installed: (Signature and Date)
Customer
Xerox Sales Representative
Xerox Analyst Representative
Xerox Service Representative
C.P Bourg Representative
For installations made in the US and Canada, a copy of the signed Customer Agreement must
be:
A) Attached to the XOA / Customer purchase order and faxed to SPA: 1-800 –407-8430.
B) Scanned and emailed to Phil.Schmelzlen@xerox.com, or faxed to Phil Schmelzlen (585)
427-3140 (8*227-3140).
As a final step in the install planning you must complete the
Customer Agreement form.
Check off the modules that will be part of this install:
•
C.P. Bourg Document Finisher
•
C.P. Bourg Cover Feeder (optional, not with iGen3)
•
C.P. Bourg Square Edge Module (optional)
•
Xerox DocuTech Bypass Transport
•
Xerox DocuPrint Bypass Transport
•
C.P. Bourg Sheet Rotator
•
Xerox iGen3 Finishing Interface kit
Record the primary customer applications:
Record any special considerations and / or limitations identified
by Xerox and agreed to by the customer:
7-5