MAINTENANCE AND CARE
Cleaning the tools
1.
After every use rinse the tools with
clean water and leave to dry (Fig 1)
2.
To disassemble the stubborn stain
tool pull the tab on the handle to
remove the front cover off (Fig 2)
3.
Rinse with clean water and replace
the front cover by aligning the tabs
and pushing securely until you hear
a 'click' (Fig 3)
14
Fig. 1
Fig. 2
Fig. 3
Storage
1.
Wrap the hose around the machine
and store all tools on the accessory
tool holder (Fig 1)
2.
Store in a clean, dry area
General Maintenance
1.
Check all nozzles after use for any
blockages and remove if required
(Fig 2)
2.
Check the hose for any blockages or
damage.
3.
Rinse both the inlet air sponge and
filter sponge after use and replace
when dry. If required replace if
damaged (Fig 3).
MAINTENANCE AND CARE
Fig. 1
Fig. 2
Fig. 3
15