Table of Contents
Advertisement
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A:\>DEBUG <CR>
-G=C800:5<CR>
Adaptec Disk Preparation Program V 3.0
Copyright (c) 1988 Adaptec, Inc.
Choose:
1 - to primary-format drive 1
2 - to primary-format drive 2
3 - for the special-options menu
q - to quit this program
Enter your selection:
Drive 1 has XXX cylinders, X heads, XX sectors
Are the above correct (Y/N): [Y]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step 4: Choose to ERASE or NOT ERASE the Adaptec Saved Defect List.
If your drive was previously formatted with Adaptec's ACB-2320B, the saved defect list will
now be displayed. normally do not erase the saved defect list. If you choose to erase,
perhaps because a previous error has resulted in a false defect map, then the Adaptec
saved list will be erased. The ESDI drive manufacturer's list is not erased.
Step 5: Enter Any More Defects.
Next, the program will prompt you for the drive defect format. If you have no additional
defect locations to enter, then select Option 1. Otherwise, choose the defect format that
matches the list of defects you wish to enter.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Saved defect list (cyl/physical sector)
Surface 0:
Do you want to ERASE saved defect list (Y/N) ?
Please specify the format of additional defects:
1 - No Additional Defects
2 - Cyl/Head/RLL byte offset
3 - Head/Cyl/RLL byte offset
4 - Cyl/Head/Logical Sector
Enter your selection : 1
Press <RETURN> to enter defects from the console, or
type the defect file name :
Enter defect at the * prompt, (a blank line will end
the list)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(http://www.franken-online.de/ymmv)
ACB-232XB User's Manual
All rights reserved.
1
XXXX/XX
XXXX/XX
N
Page 15 of 30
Advertisement
Table of Contents
