Customer Information - Xerox DocuPrint 92C Reference Manual

Electrical requirements
•
System Control Module (60 Hz):
– 115 or 220 VAC
– 15 amp service (for 115 VAC, NEMA 5-15R or
ANSI C73, 11R)
– 0.4 KVA rating
•
System Control Module (50 Hz):
– 100-240 VAC +/- 10%
– 15 amp service
(power connection per local codes/regulations)
– 0.4 KVA rating
•
Printer Module (60 Hz):
– 120/208 or 120/240 VAC
– 30 amp service (NEMA 14-30R)
– 5.5 KVA rating (Operating mode)
•
Printer Module, DELTA configuration (50 Hz):
– 220, 230, 240 VAC
– 30 amp service
(power connection per local codes/regulations)
– 5.5 KVA rating (Operating mode)
Submitting 600 dpi jobs
To submit 600 dpi jobs on your Xerox DocuPrint 92C NPS, use one of
the job submission methods described below.
Note: These methods are required only until the Common Client 2.3
driver becomes available.
1. Install the revised 4890 PostScript Printer Description (PPD) file
from your NPS 1.6.1 system with the existing Common Client 2.1
driver (refer to the Guide to Submitting Jobs from the Client). This
PPD file allows both models 4890 and 92C to utilize the 4890
driver with no limitation.
2. Install the Xerox INF file for use with the Microsoft PScript driver
(refer to the Guide to Submitting Jobs from the Client), then use
the native driver with the new PPD file (enhanced for DocuPrint
92C NPS).
Note: Use this method when native 600 dpi is required but
access to Xerox job ticketing is not required.
3. Install the Xerox INF file for use with the Microsoft PScript driver
(refer to the Guide to Submitting Jobs from the Client), then use
the native driver with the new PPD file and generate a PostScript
(.ps) file. Finally, use DigiPath QuickPrint job submission client to
submit your job. The job will be submitted to a 4890 printer.
Note: Use this method when both native 600 dpi and Xerox job
ticketing are required.
Supplies
Xerox Color Reorder Reorder Cartridges
# (US) # (XE) per Carton
Dry Ink, Black 6R296 6R90193 6
Dry Ink, Red 6R297 6R90194 3
Dry Ink, Blue 6R754 6R90225 3
Dry Ink, Green 6R299 6R90196 3
Dry Ink, Cyan 6R755 6R90226 3
Dry Ink, Magenta 6R816 6R90227 3
Dry Ink, Royal 6R826 6R90232 3
Dry Ink, Cardinal 6R825 6R90231 3
Dry Ink, Violet 6R828 6R90243 3
Dry Ink, Ruby 6R827 6R90242 3
Dry Ink, Brown 6R842 6R90245 3
Fuser Lubricant 8R983 8R983 2 Tubes
Stitcher Wire 8R1174 8R1174 1 Reel
Notes:
•
Expected dry ink yield is based on a 5% black and 1.5% color
area coverage. This yield will vary depending on area coverage of
the application and darkness settings of the printer.
•
Use only dry ink that is specified for use in the DocuPrint 92C
printer even when printing non-colored jobs.
•
Purchase of colored dry ink is required to operate your DocuPrint
92C NPS highlight color system.
A small amount of colored dry ink is consumed even when
printing non-colored jobs, except in the Black Executive mode.
For further information on this topic, consult your local Xerox
service representative.
Reference material
•
Refer to the Helpful Facts About Paper to help in selection of
preprinted forms, perforated stock and labels.
•
Refer to the Highlight Color in Business Documents -- a Practical
Guide for information on how to leverage the business benefits of
HLC documents.
1999, 2000 by Xerox Corporation. All rights reserved.
Expected
Yield
Xerox DocuPrint
(Prints/
Carton)
92C NPS
180,000
270,000

Customer Information

270,000
270,000
Quick Reference Card
270,000
270,000
270,000
270,000
The Xerox DocuPrint 92C NPS is a highlight color printing
system. Refer to this card for information on the Xerox
270,000
DocuPrint 92C NPS.
270,000
270,000
240,000
32,000
Staples
Version 7.1
August 2000
721P87521
XEROX