Reverting Default Colors To Factory Settings - EFI DocuColor 8000 Supplementary Manual

S -O
POT N
4 Place the ES-1000 over the target color, making sure to center the sample aperture over the
color. Press Measure to take the measurement.
The measured CMYK values are imported into Spot-On as follows:
• If an individual color is selected in the color list, it updates to the measured color.
• If a group is selected in the color list, a new color with the measured values is created
within the group.
• If the Spot-On Color Search dialog box is open, the center patch updates with the
measured values, and the neighbor patches update accordingly.
• If the Set Center Patch Color dialog box is open, the measured values are imported into
the CMYK entry fields.
5 After you finish taking color measurements, choose Stop from the Instrument menu.
Spot-On closes the connection to the instrument.

Reverting default colors to factory settings

You can revert default colors to their factory default settings. Revert all colors within a default
color group, or revert one or more specific colors within a default color group, so that only
those colors are reset to the factory default settings.
T
O REVERT ALL COLORS WITHIN A DEFAULT COLOR GROUP TO FACTORY DEFAULTS
1 Click the icon to the left of the name of the group that you want to revert.
2 Choose Revert Group from the File menu.
A warning message appears.
3 Click OK.
T
O REVERT SPECIFIC COLORS WITHIN A DEFAULT COLOR GROUP TO FACTORY DEFAULTS
1 Click the icon to the left of the name of the group that contains the colors you want to revert.
2 Select the colors that you want to revert to the factory defaults.
To select more than one color, Shift+click to select an adjacent color or CTRL+click to select
a nonadjacent color.
3 Choose Revert Factory Color from the File menu.
A warning message appears.
4 Click OK.
60