Calibrating With The Es-1000; Es-1000 With Calibrator - EFI DocuColor 8000 Supplementary Manual

C
ALIBRATION
12 Repeat the measurement process for the magenta, yellow, and black strips.
A check mark appears on the circle of the color just read, and the Status field indicates the
color was measured successfully.
Use the Previous and Next buttons to reverse or advance to another step in the measurement
sequence.
13 When the Status field indicates that all four color strips have been read successfully, click
Accept Measurements.
14 Click OK in the Measure dialog box.
15 Click Apply in the Calibrator dialog box to implement the new calibration set.
16 Click OK in the Information dialog box.
This completes the Fiery EXP8000/50 calibration process.

Calibrating with the ES-1000

Use ColorWise Pro Tools in conjunction with the ES-1000 spectrophotometer to calibrate
the Fiery EXP8000/50.
Before you use ColorWise Pro Tools to calibrate the Fiery EXP8000/50, set up and
N :
OTE
calibrate the ES-1000. For instructions, see the documentation that accompanies the
instrument.
T F EXP8000/50
O CALIBRATE THE IERY
1 Start Calibrator.
For instructions, see
2 Choose ES-1000 as the measurement method.
3 In the Check Print Settings pane, choose a calibration set.
If more than one option appears, choose the appropriate calibration set for the type of media
and screen you use most often.
ES-1000
USING THE
page 33.
41