Using Spot-On; Use Spot - EFI DocuColor 8000 Supplementary Manual

C W P
OLOR ISE RO
2 If the Device Link Profile does not have a source or output assigned, select a Profile
Description name, and the source and output profiles for the Device Link Profile.
3 After you finish assigning settings to the Device Link Profile, click OK.
Modifying Device Link Profiles
To modify the Device Link Profile settings, use the following procedure.
T D L P
O MODIFY EVICE INK ROFILE SETTINGS
1 Double-click the Device Link Profile in the Device Link panel.
The Device Link Profiles Settings dialog box appears.
2 Enter the new Source and Output profiles.
3 Click Apply and then click OK.
You cannot edit the Device Link Profile in ColorWise Pro Tools. You must use the
N :
OTE
application that was used to create the Device Link Profile.

Using Spot-On

Spot-On allows you to adjust and manage lists of spot colors and their CMYK equivalents.
The matching lists of spot colors and CMYK values are known as Spot Color Dictionaries.
Spot-On allows you to maintain multiple Spot Color Dictionaries for each output profile on
the Fiery EXP8000/50. For more information about Spot-On, see
T
OOLS
28
page 48.