Sony XR-55X90K Service Manual page 81

TROUBLESHOOTING
4.4 No Picture at Tuner - FOR DIGITAL TUNING 2 For US ATSC3.0 and Philippines
NG
Check part mounting condition
for I2C SDA & SCL line.
NG
(Refer Note I2C)
OK
Change Tuner module
Check the status of IC3001 peripheral
components
Change NG parts
(UC ATSC 3.0, Philippines, JP)
Digital Tuning 2
For US ATSC3.0
and Philippines
Confirm ANT or Satellite connection
Sound is normal?
OK
No sound
Can it preset Digital broadcast?
OK
NG
Can it preset Analog broadcast?
TU1_TS_VALID, TU1_TS_SYNC, TU_TS1_DATA1(JP Only)"
OK
Check part mounting condition
for X_DEMOD_RST_STBY line.
NG
(Refer Note RST)
OK
For JP
NG
A
OK
IC1000 (SoC)
defect
Check part mounting condition for digital data line
"TU1_TS_DATA0, TU1_TS_CLK,
(Refer Notes: TS line)
NG
Change NG parts
Change NG parts
Notes: I2C
- Parts for I2C SDA line: R3036, C3005
- Parts for I2C SCL line : R3035, C3006
Waveform confirmation point
• I2C_TU_ SDA line: JL3013
• I2C_TU_SCL line : JL3012
Notes: TS line
-TS line parts for US ATSC3.0/Philippines
R3120/R3121/ R3122/ R3123/ R3114/ C3126/
R3116/R3117/RB3001
- TS line parts for JP :
R3113/R3120/R3121/ R3122/ R3123/ R3114/ C3126/
R3116/R3117/RB3001
A : Insert correct signal in correct ANT terminal.
OK
Replace main
board
Notes: RST
- Parts for X_DEMOD_RST_STBY line:
R3109, C3117
Voltage confirmation point
C3117 = 3.3V
81
SYS SET