Industry Canada; Intended Use - Bosch GSR18V-800FC Operating/Safety Instructions Manual

The manufacturer is not responsible for radio
interference caused by unauthorized modi-
fications to this equipment. Such modifica-
tions could void the user's authority to oper-
ate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interfer-
ence, and
2) This device must accept any interference
received, including interference that may
cause undesired operation.
NOTE! This equipment has been tested and
found to comply with the limits for a Class
B digital devices, pursuant to Part 15 of the
FCC rules. These limits are designed to pro-
vide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications. However, there is no guarantee
that interference will not occur in a particu-
lar installation. If this equipment does cause
harmful interference to radio or television re-
ception, which can be determined by turning
the equipment off and on, the user is encour-
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference,
and
The power tool is intended for driving and
loosening screws and for drilling in wood,
metal and plastic.
The power tool can be used with an angle
screw drill chuck adapter (GFA 18-WM), an
off-set angle adapter (GFA 18-E), and a metal
drill chuck adapter (GFA 18-M).
8 8
2610070415 GSR18V800FC 202310.indd 8
page heading FCC Caution
aged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
"Exposure to Radio Frequency (RF) Signals:
The wireless device is a radio transmitter and
receiver. It is designed and manufactured not
to exceed the emission limit for exposure to
radio frequency (RF) energy set by the Minis-
try of Health (Canada), Safety Code 6. These
limits are part of comprehensive guidelines
and established permitted levels of RF en-
ergy for the general population.
These guidelines are based on the safety
standards previously set by international
standard bodies. These standards include a
substantial safety margin designed to assure
the safety of all persons, regardless of age
and health.
This device and its antenna must not be co-
located or operating in conjunction with any
other antenna or transmitter.

Industry Canada

(2) this device must accept any interference,
including interference that may cause un-
desired operation of the device.

Intended use

With the Bluetooth® Low Energy Module GCY
42 inserted, power tool data and settings can
be transferred between the power tool and a
mobile device by means of Bluetooth® wire-
less technology.
SAVE THESE INSTRUCTIONS
10/24/23 3:15 PM