Dust Extraction - Bosch GSR18V-800FC Operating/Safety Instructions Manual

HDC200 SDS-Max Hammer Dust
Collection Attachment
(Sold Separately)
struction manual for the use of the tool with
this attachment.
SAVE THESE INSTRUCTIONS
Use with VAC090A or VAC140A with airflow
150 CFM (turbine) 176 CFM (vacuum) and
a filter efficiency of min. 99.9% in combina-
tion with dust shroud HDC200 (GDE68).
Drilling Capacity
Optimized
Maximum
* brush ring must be removed for diam-
eters larger than 1-3/8"
HDC200 Operating Instructions
(for use with GFA18-H SDS
Hammer Adapter)
making any assembly,
changing accessories. Such preventive safe-
ty measures reduce the risk of starting the
tool accidentally.
Fig. 22
Dust
Extraction
Unit
Dust
Port
Snap-in
Connector
2610070415 GSR18V800FC 202310.indd 23

Dust Extraction

To reduce the risk of in-
jury user must read in-
1/4" — 1-3/8"
2-5/8" *
Disconnect the plug from
the power source before
adjustments
Brush
Ring
Connector
Dust
Extractor
Fig. 21
Brush ring
Dust port
The HDC200 Bosch dust extraction attach-
ment is designed to be used in drilling appli-
cations in concrete and masonry type materi-
als. Not for use on wood or metal materials.
The HDC200 is optimized for use with drill
bit diameters from 1/4" to 1-3/8". The maxi-
mum bit diameter is 2-5/8" (brush ring must
be removed for diameters larger than 1-3/8").
Insert the dust extractor hose from the dust
extractor into the dust port of the dust ex-
traction unit (Fig. 22).
The Bosch dust extractor hose comes with a
sleeve nozzle attached to a snap-in connec-
tor. The sleeve nozzle provides the quickest
or
and easiest connection of the nozzle to the
attachment. The snap-in connector provides
a more secured connection. To use the snap-
Fig. 23
Sleeve
Nozzel
Rubber
seal
23
10/24/23 3:15 PM