Indicators Displayed In (Auto) Mode - Nikon COOLPIX S60 User Manual

Step 1 Turn the Camera On and Select
0
(Auto) Mode
Indicators Displayed in
0
(Auto) Mode
The information on indicators in the monitor during shooting will display only for a
few seconds
(~
139).
Shooting mode
o
is displayed in
0
(auto) mode.
Image mode
The combination of image size
and image quality (compression)
is displayed. The default setting
is [1O",j (3648
x
2736).
Vibration reduction can be applied to
reduce the effects of camera shake.
Internal memory indicator
Pictures will be recorded to internal memory
(approximately 20 MB). When memory card
is inserted, [;::] is not displayed and pictures
will be recorded to memory card.
~
Functions Available in
0
(Auto) Mode
In
0
(auto) mode, macro mode (~ 35) can be applied and pictures can be taken using the flash
mode (~ 30), self-timer (~ 32), and smile timer (t1'3 33) Tap ~ in
0
(auto) mode to display the
HOME screen
(~
12) and tap the menu control to specify settings for all shooting menu items
(~
115).
~
Vibration Reduction
Vibration reduction
(~
142) in the setup menu
(t1'3
133), when On (default setting) is selected,
can be applied to effectively reduce blur, (,lUsed by slight hand movement known as (Jmera shake,
that commonly occurs when shooting with Loom applied or at slow shutter speeds.
Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
To reduce the effects of camera shake when recording movies, enable Electronic VR
(~
90) from
the movie menu (~ 88).
23