Functions That Cannot Be Applied Simultaneously - Nikon COOLPIX S60 User Manual

V'l
:::r
o
o
,...,.
::J
lD
""0
OJ
'<
0-
OJ
()
A
OJ
::J
Q.
V'l
I"[) ,...,.
C
"'0
s:
I"[)
::J
C
VI
728
Shooting Options: The Shooting Menu
Functions that Cannot Be Applied Simultaneously
Restrictions apply to the following settings in
0
(auto) mode.
Flash mode
Flash mode is automatically set to
(!)
(Off) and cannot be adjusted when
Continuous, BSS, or Multi-shot 16
is selected for the
Continuous
setting.
Selecting
Single or Intvl timer shooting for Continuous
restores the last flash
mode setting applied.
Self-timer
If self-timer is on, only one picture will be taken when the shutter is released,
regardless of settings selected for the Continuous setting. The last Continuous
setting applied is restored when picture is taken or self-timer is turned off
Continuous
Image mode
is automatically set to
Gm
Normal (2592)
and cannot be adjusted
when
Multi-shot 16
is selected for the
Continuous
setting.
The last image mode setting applied is restored when any setting other than
Multi-
shot 16
is selected for the
Continuous
setting.
ISO sensitivity
When
ISO sensitivity
is set to
3200, Image mode
cannot be set to
!IiI
High
(3648*),
mm
Normal (3648), or
m
16:9 (3584).
At an image mode setting of
mm
High (3648*) or
mm
Normal (3648),
selecting
3200 for ISO sensitivity
automatically switches the image mode setting to
Gm
Normal (2592).
At an image
mode setting of
m
16:9 (3584),
selecting
3200 for ISO sensitivity
automatically
switches the image mode setting to ~
16:9 (1920).
When any option other than
3200 is selected for ISO sensitivity, the last image mode setting applied is
restored.
At an ISO sensitivity setting of 3200, the Multi-shot 16 option of the continuous
shooting mode is not available. At a
Continuous
setting of
Multi-shot 16,
selecting 3200 for ISO sensitivity switches the Continuous setting to Single. The
Continuous setting does not change even when ISO sensitivity is set to options
other than
3200.
Distortion control
When Distortion control is set to On, the Continuous setting is automatically set
to Single.
Even when the
Distortion control
option is disabled, the
Continuous
setting
does not change.